Centrifughe Digicen 22/22R
The Digicen 22 centrifuges stand out for its versatility within the universal centrifuges.rAll its rotors are provided with the REI system (Rotor Easy to Install), which allows them to be securely installed on the rotor without the need for tools, and to be unlocked by simply removing them from their position. The centrifuges are designed to process a wide range of samples, offering the most exhaustive control of the equipment, as thanks to the free Ortoalresa SmartConnect application, you can consult, programme and control the centrifuge from the device of your choice; PC, tablet and mobile phone. TFT color touch screen shows RPM and RCF, time, temperature, and acceleration/deceleration values (PCBS) along with graphical indicators opening / closing cover, advancing spinning process, messages and signals acoustic error or end of the process, which facilitates the user to control the spinning process.rFeatures for both modelsr- Linked program: Permits the linking of up to 8 consecutive programmes without the need of user intervention.r- 100 programmable memories, with protection under password.r- Noise level: below 60 dB.r- Possibility to block or modify the speed during the cycle.r- Automatic rotor recognition. Over-speed protection.r- Unbalance detection and switch off.r- Chamber of centrifugation in stainless steel (easy cleaning).r- Rotors and adapters autoclavable, easy to install without tools (REI System)rDigicen 22r- Forced ventilation to reduce temperature increasing.rDigicen 22 R with refrigeration systemr- Maintains the refrigeration after the centrifugation process.r- Precooling program with rotor spinning and selectable temperature. r- Guarantees 4°C at maximum RPM.r- Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C steps. r- Temperature sensor inside the chamber.r- Gas R 449A HFO (CFC free).
Centrifuge (rotor not included)
Rotor RT315. With REI system. Rotor with capacity for 4 conical cap tubes 15 mL (Ø17x122 mm), 28 round bottom, cap tubes 15 mL (Ø16x100 mm), 28 blood sample tubes 10 mL (Ø16x107 mm), 28 conical tubes 10 mL ((Ø16x105 mm), 28 round bottom cap (hs) tubes 10 mL (Ø16x80 mm)
Accessories for rotor RT315
Rotor RT316. With REI system
Accessories for Rotor RT316
Rotor RT 317. With caps and REI system. Rotor with capacity for 4 flat bottom tubes, cap, (hs) 125 mL (Ø48x108 mm)
Accessories for Rotor RT317
Rotor RT318. With REI system. Rotor with capacity for 6 plates microtiter 128x86x15 mm, 4 plates microtiter 128x86x21 mm, 2 plates microtiter 128x86x45 mm.
Accessories for Rotor RT318
Rotor RT319. With REI system. Rotor with capacity for 32 microtubes 0,2 mL (Ø6x21 mm) and 4 PCR strips 0,2 mL (Ø6x21 mm).
Rotor RT320. With caps and REI system. Rotor with capacity for 24 microtubes 1,5-2,2 mL (Ø11x42 mm).
Accessories for rotor RT320
Rotor RT 321. With caps and REI system. Rotor with capacity for 6 conical screw cap tubes 5 mL (Ø17x68 mm) and 12 conical snap cap tubes 5 mL (Ø17x60 mm).
Accessories for rotor RT321
Rotor RT 322. With REI system. Rotor with capacity for 24 blood sample tubes 5 mL (Ø13x82 mm) and 24 round bottom tubes 5 mL (Ø13x75 mm).
Rotor RT323. Incluye REI system. Rotor con pacidad para 12 tubos cónicos tapón 15 mL (Ø17x122 mm), 24 tubos fondo redondo tapón 15 mL (Ø16x100 mm), 24 tubos fondo redondo tapón 12 mL (Ø16x110 mm), 24 tubos extr. sangre 10 mL (Ø16x107 mm) y 24 tubos cónicos 10 mL (Ø16x105 mm).
Accessories for rotor RT323.
Rotor RT 324. With REI system. Rotor with capacity for 32 conical cap tubes 15 mL (Ø17x122 mm), 32 round bottom, cap tubes 15 mL (Ø16x100 mm), 32 blood sample tubes 10 mL (Ø16x107 mm), 32 conical tubes 10 mL (Ø16x105 mm).
Accessories for rotor RT324
Rotor RT325. With REI system
Accessories for rotor RT325
Rotor RT326. With caps and REI system. Rotor with capacity for 12 round bottom, cap (hs) tubes 10 mL (Ø16x80 mm).
Accessories for rotor RT326
Rotor RT327. With caps and REI system
Accessories for rotor RT327
Rotor RT328. With caps and REI system
Accessories for rotor RT328
Centrifuge Accessories. Rolling tables
Seguici:
Via Massimo D’Azeglio 20- 26900 LODI (LO)
T +39 02 9823 0679customerservice@scharlab.it