Diaphragm vacuum pump N 920 G
- Flow rate of 1.26 m³/h and a final vacuum of 2 mbar abs.
- High suction power, especially at low vacuum.
- Integrated speed control facilitates manual adjustment of pump capacity to process requirements.
- The PPS pump head combined with the PTFE coated membrane is ideal for aggressive / corrosive vapors and gases.
- Integrated air ballast valve.
Tip: The VC 900 Vacuum Controller and a control cable are used to adjust the speed according to the process requirements.
Technical caracteristics:
Ambient temperature: +10 to +40°C.
Permissible liquid temperature: +5 to +40°C.
Pump head: PPS.
Membrane with PTFE coating.
Valves: FFPM.
- Application: degassing, gel drying, rotary evaporation, distillation, centrifugal concentrator.
- Flow rate of 1.26 m³/h and a final vacuum of 2 mbar abs.
- High suction power, especially at low vacuum.
- Integrated speed control facilitates manual adjustment of pump capacity to process requirements.
- The PPS pump head combined with the PTFE coated membrane is ideal for aggressive / corrosive vapors and gases.
- Integrated air ballast valve.
Tip: The VC 900 Vacuum Controller and a control cable are used to adjust the speed according to the process requirements.
Technical caracteristics:
Ambient temperature: +10 to +40°C.
Permissible liquid temperature: +5 to +40°C.
Pump head: PPS.
Membrane with PTFE coating.
Valves: FFPM.
Accessories
Connect:
Gato Pérez, 33. Pol. Ind. Mas d’en Cisa E08181 Sentmenat, Barcelona, España
T +34937456400F +34937152765
helpdesk@scharlab.com
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene