Waste Cap, V2.0 with connector for exhaust filter and mechanical level control. Connectors (mm OD): 2x 2,3/3,2 mm OD + 1x 5,0 - 11,5mm ID. Thread S60/61, filter not included. SCAT®. Waste caps
Characteristic
Description : Safety Waste Cap, V2.0 with connector for exhaust filter and mechanical level control
Connectors (Outer diameter mm) : 2x 2,3/3,2 mm OD + 1x 5,0 - 11,5mm ID
Pack (u.) : 1
Laboratory efficiency and excellence come by avoiding potentially hazardous vapours and solvents and, also, by reducing the risk and nuisance of laboratory waste management. Safe management of waste solvents starts with the screw cap, because all of them are provided with a bore for the exhaust fumes trap (absorbent activated carbon). Trap not included. See end of table.
Technical documentation
TDS / Technical data sheet
Register for downloadsSDS / Material Safety Data Sheets
Register for downloads
Products marked with this image are Scharlau brand products usually in stock, ready for immediate delivery.
Connect:
Gato Pérez, 33. Pol. Ind. Mas d’en Cisa E08181 Sentmenat, Barcelona, España
T +34937456400F +34937152765
helpdesk@scharlab.com
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene