Rotary Vane Pumps
- High pumping speed even at low pressure
- High vapour tolerance for water and solvents
- Anti-corrosion design: polished and plasma treated internal surfaces
- Lubrication circuit and large oil volume for longer service interval
- Compact design, smaller dimensions, low weight, ease of maintenance through telescopic design
- Mains supply: 230V, 50Hz
Oils
- B: Standard oil with very good viscosity characteristics, good chemical resistance, as well as a better stability when pumping oxidants such as acid and alkaline vapours.
- K 8: Especially designed for pumping acid vapours. It is very hygroscopic and has limited capacity for water vapour. The alkaline additive is consumed during operation, making it necessary to change the fluid regularly, even if the pump is not used for several days.
Lower vapour pressure and the viscosity characteristics than pump oil B.
-SI 2: Very high aging resistance. Stable against many aggressive gases (e. g. chlorine and hydrochloric acid).
Perfluoropolyether oil: This synthetic oil has excellent chemical resistance and is certified for pumping pure oxygen. Therefore it is used for pumping strong oxidants (halogenides, nitrogen oxides etc.). For these applications, the rotary vane pump must be prepared (completely disassembled, cleaned and filled with perfluoropolyether oil) by VACUUBRAND. This oil is available in 2 sorts: type PFPE 1 is exclusively suitable for rotary vane pumps RE / RZ 2.5 and 6 and particularly reasonably priced. The oil PFPE 2 can be used in all VACUUBRAND rotary vane pumps.
One stage and two stage rotary vane pumps are used wherever an ultimate vacuum down to 10-3mbar has to be attained. Selection depends upon the ultimate vacuum and pumping speed requirements of the respective application. They have an integrated oil pump and high effective gas ballast system for improved water vapour tolerance. These compact and high performance pumps together with their modular accessories can be used for a wide range of laboratory and process applications.
- High pumping speed even at low pressure
- High vapour tolerance for water and solvents
- Anti-corrosion design: polished and plasma treated internal surfaces
- Lubrication circuit and large oil volume for longer service interval
- Compact design, smaller dimensions, low weight, ease of maintenance through telescopic design
- Mains supply: 230V, 50Hz
Oils
- B: Standard oil with very good viscosity characteristics, good chemical resistance, as well as a better stability when pumping oxidants such as acid and alkaline vapours.
- K 8: Especially designed for pumping acid vapours. It is very hygroscopic and has limited capacity for water vapour. The alkaline additive is consumed during operation, making it necessary to change the fluid regularly, even if the pump is not used for several days.
Lower vapour pressure and the viscosity characteristics than pump oil B.
-SI 2: Very high aging resistance. Stable against many aggressive gases (e. g. chlorine and hydrochloric acid).
Perfluoropolyether oil: This synthetic oil has excellent chemical resistance and is certified for pumping pure oxygen. Therefore it is used for pumping strong oxidants (halogenides, nitrogen oxides etc.). For these applications, the rotary vane pump must be prepared (completely disassembled, cleaned and filled with perfluoropolyether oil) by VACUUBRAND. This oil is available in 2 sorts: type PFPE 1 is exclusively suitable for rotary vane pumps RE / RZ 2.5 and 6 and particularly reasonably priced. The oil PFPE 2 can be used in all VACUUBRAND rotary vane pumps.
Pumps
RE2.5 Number of stages
1 Flow (m3/h)
2,3 Final vacuum (mbar abs.)
3x10-1 Dimensions WxHxD (mm)
316x190x125 Weight (Kg)
10,2 Pack (u.)
1
RE6 Number of stages
1 Flow (m3/h)
5,7 Final vacuum (mbar abs.)
1x10-1 Dimensions WxHxD (mm)
370x207x142 Weight (Kg)
15,4 Pack (u.)
1
RE9 Number of stages
1 Flow (m3/h)
8,9 Final vacuum (mbar abs.)
1x10-1 Dimensions WxHxD (mm)
460x232x152 Weight (Kg)
21,4 Pack (u.)
1
RZ2.5 Number of stages
2 Flow (m3/h)
2,3 Final vacuum (mbar abs.)
2x10-3 Dimensions WxHxD (mm)
316x190x125 Weight (Kg)
11,4 Pack (u.)
1
RZ6 Number of stages
2 Flow (m3/h)
5,7 Final vacuum (mbar abs.)
2x10-3 Dimensions WxHxD (mm)
370x207x142 Weight (Kg)
16,4 Pack (u.)
1
RZ9 Number of stages
2 Flow (m3/h)
8,9 Final vacuum (mbar abs.)
2x10-3 Dimensions WxHxD (mm)
460x232x152 Weight (Kg)
24,2 Pack (u.)
1
Oils
B Capacity (l)
1 Pvapor (bar)
&lt; 1x10-3 Flash point (ºC)
264 Viscosity 40ºC (mm2/s)
94 Density 20ºC (g/cm3)
0,87 Pack (u.)
1
B Capacity (l)
5 Pvapor (bar)
&lt; 1x10-3 Flash point (ºC)
264 Viscosity 40ºC (mm2/s)
94 Density 20ºC (g/cm3)
0,87 Pack (u.)
1
B Capacity (l)
20 Pvapor (bar)
&lt; 1x10-3 Flash point (ºC)
264 Viscosity 40ºC (mm2/s)
94 Density 20ºC (g/cm3)
0,87 Pack (u.)
1
K8 Capacity (l)
1 Pvapor (bar)
&lt; 5x10-3 Flash point (ºC)
249 Viscosity 40ºC (mm2/s)
128 Density 20ºC (g/cm3)
0,89 Pack (u.)
1
K8 Capacity (l)
5 Pvapor (bar)
&lt; 5x10-3 Flash point (ºC)
249 Viscosity 40ºC (mm2/s)
128 Density 20ºC (g/cm3)
0,89 Pack (u.)
1
K8 Capacity (l)
20 Pvapor (bar)
&lt; 5x10-3 Flash point (ºC)
249 Viscosity 40ºC (mm2/s)
128 Density 20ºC (g/cm3)
0,89 Pack (u.)
1
SI2 Capacity (l)
1 Pvapor (bar)
&lt; 1x10-3 Flash point (ºC)
&gt; 255 Viscosity 40ºC (mm2/s)
75 Density 20ºC (g/cm3)
0,96 Pack (u.)
1
PFPE 1 Capacity (l)
0,3 Pvapor (bar)
&lt; 3x10-5 Flash point (ºC)
- Viscosity 40ºC (mm2/s)
60 Density 20ºC (g/cm3)
1,9 Pack (u.)
1
PFPE 2 Capacity (l)
0,5 Pvapor (bar)
&lt; 3x10-5 Flash point (ºC)
- Viscosity 40ºC (mm2/s)
60 Density 20ºC (g/cm3)
1,89 Pack (u.)
1
Connect:
Gato Pérez, 33. Pol. Ind. Mas d’en Cisa E08181 Sentmenat, Barcelona, España
T +34937456400F +34937152765
helpdesk@scharlab.com
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene