CryoTouch cryoscopers are automatic equipments for the rapid determination of the milk cryoscopic point variation caused by added water, in full compliance with the IDF-ISO 5764:2009 international reference standard. CryoTouch 20 and CryoTouch 40 models have a 20-place autosampler carousel and 40-place autosampler carousel, respectively.rThese new generation cryoscopers include a lot of useful features that the most recent technology allows: a full colour 7' touchscreen display, real-time visualization of the freezing curve, stable memory for more than 4,000 results, a PC software for data handling, a USB port for downloading all data to a pen drive and much more. They allow milk labs and dairy industries to perform official analysis based on ISO reference method. The new 'lactose-free' function helps milk and dairy industries monitor the process of removal of lactose in milk and cream.rrFeatures:r- 6 values for setting the reference value and between 2 different formula to calculate the added water %r- 2 reading modes: plateau mode according to ISO method or fixed- time moder- Real-time graph of the sample temperature during each analysisr- An alphanumeric ID code can be added to each sampler- Optional barcode reader for a quick sample identification (to be requested at the order)r- Results shown in different colours for a quick check of anomalies or critical valuesr- 'Lactose-free milk' function to control the removal of lactose in milk/creamr- Stable memory for 2 different calibration curves: the typical one in compliance with ISO requirements and a second one to be set according to the user's needs (i.e.: Lactose-free curve)r- Stable memory for up to 4,000 resultsr- Easy download of test results to a USB pen driver- Real time PC monitoring or quick download of test results to a PC thanks to CryoSoft Touch data softwarer- Immediate visualization of error messagesrrSpecifications:r- Full colour 7' touchscreen displayr- Bath with Peltier cells controlled by softwarer- Working room temperature: from +5°C to +36°Cr- Automatic calibrationr- Lash and agitation width controlled by softwarer- Selectable °C, °Hortvet and water% unitsr- Analysis duration: about 2 minutes/testr- Warm up time: about 5 minutesr- USB port for data downloading to a pen driver- 2 x RS232 ports for connecting an optional thermal printer and a PCr- An additional RS232 port can be added for connecting an optional barcode readerr- Power supply: 110/220 V, 50/60 Hz, 150 WrrAll cryoscopes are supplied with a 'starter-kit' including a box of glass sample tubes, a tube-holder, 3 calibration standards and a cooling liquid bottle.
TDS / Technical data sheet
Register for downloadsSDS / Material Safety Data Sheets
Register for downloadsProducts marked with this image are Scharlau brand products usually in stock, ready for immediate delivery.