Hardness tester PCE-2000N

The PCE-Instruments PCE-2000N durometer uses the Leeb rebound method. It can be used very flexibly in the incoming or outgoing inspection, in production and generally in all areas where hardness has an influence on quality parameters. It can be used to measure six different hardness scales as well as ten different materials.
As standard, the durometer is supplied with a striker D, but optional additional impactors (DC, DL, C, D + 15, E, G) can be connected for more specific applications.

- External impact device on 1.5 m
- Storage data measurements on USB
- Measurement in different angles possible
- Color display

The PCE-Instruments PCE-2000N durometer uses the Leeb rebound method. It can be used very flexibly in the incoming or outgoing inspection, in production and generally in all areas where hardness has an influence on quality parameters. It can be used to measure six different hardness scales as well as ten different materials.
As standard, the durometer is supplied with a striker D, but optional additional impactors (DC, DL, C, D + 15, E, G) can be connected for more specific applications.

- External impact device on 1.5 m
- Storage data measurements on USB
- Measurement in different angles possible
- Color display

Ver más
Range
170 - 960 HLD 80 - 1042 HV 19 - 683 HB 30.6 - 102.6 HS 59.1 - 88 HRA 13.5 - 101.7 HRB 17.9 - 69.5 HRC
Accuracy
± 0.5 % at HLD = 800
Repeatability
0.8 % at HLD = 800
Hardness scales
HL (Leeb) HV (Vickers) HB (Brinell) HS (Shore) HRA (Rockwell A) HRB (Rockwell B) HRC (Rockwell C)
Pack (u.)
1
Reference
PCE-02000N
Packaging
x u
Price
Buy
Disponibility