English En

Dichloromethane, stabilized with approx. 50 ppm of amylene, Multisolvent® HPLC grade ACS ISO UV-VIS

- Synonyms: Methylene chloride, Chloromethylener- CH2Cl2r- M = 84,93 g/molr- CAS [75-09-2]r- EINECS-No.: 200-838-9r- Density: 1,32 g/cm3 r- Solub. in water: (20 ºC): 20 g/lr- Melting point: ~ -95 ºCr- Boiling point: 40 ºCr- Ignition temp.: 605 ºCr- Vapour pressure: (20 ºC) 475 hPar- Dielectric const.: (20 ºC) 9,1r- LD 50 (oral, rat): 1600 mg/kgr- EC-Index-No.: 602-004-00-3r- ADR: 6.1 T1 III UN 1593r- IMDG: 6.1 III UN 1593r- IATA/ICAO: 6.1 III UN 1593r- GHS-signal word: Warningr- GHS-H sentences: H315 - H319 - H335 - H336 - H351 - H373 - r- GHS-P sentences: P260 - P280 - P305+P351+P338 - P321 - P405 - P501ar- Tariff number: 2903 12 00 00r- Applications: solvents, analytical chemistry.rrSPECIFICATIONSrassay (G.C.): min. 99,9 %ridentity (IR-spectrum): passes testrdensity (20º/4º): 1,323 - 1,327rappearance: clearrcolour (Hazen): max. 10 racidity: max. 0,0002 meq/gralkalinity: max. 0,0002 meq/grfree chlorine (as Cl): max. 0,00002 %rchlorides (Cl): max. 0,0001 %raluminium (Al): max. 0,1 ppmrbarium (Ba): max 0,01 ppmrboron (B): max. 0,02 ppmrcadmium (Cd): max 0,01 ppmrcalcium (Ca): max. 0,3 ppmrchromium (Cr): max. 0,02 ppmrcobalt (Co): max. 0,02 ppmrcopper (Cu): max. 0,02 ppmriron (Fe): max. 0,02 ppmrlead (Pb): max. 0,1 ppmrmagnesium (Mg): max. 0,1 ppmrmanganese (Mn): max 0,01 ppmrnickel (Ni): max. 0,02 ppmrtin (Sn): max. 0,1 ppmrzinc (Zn): max 0,01 ppmrcarbon tetrachloride (G.C.): max. 0,005 %rchloroform (G.C.): max. 0,005 %rethanol (G.C.): max. 0,02 % rmethanol (G.C.): max. 0,01 %rformaldehyde: max. 0,0005 %rresidue on evaporation: max. 0,0002 %rwater (K.F.): max. 0,01 %rrliquid chromatography suitability absorbance: passes testrrrwavelength:: T(%) A (AU)r235 nm: 20 % 0,699 AUr240 nm: 50 % 0,301 AUr245 nm: 80 % 0,097 AUr248 nm: 90 % 0,046 AUr255 nm: 98 % 0,009 AUrrMicrofiltered through membranes of pore diameter 0,22 µm r