Ethyl acetate, for GC residue analysis
- C4H8O2
- M = 88,10 g/mol
- CAS [141-78-6]
- EINECS-No.: 205-500-4
- Density: 0,90 g/cm3
- Solub. in water: (20 ºC): 85,3 g/l
- Melting point: -83 ºC
- Boiling point: 77 ºC
- Flash pt. -4 ºC
- Ignition temp.: 460 ºC
- Vapour pressure: (20 ºC) 97hPa
- Refraction index: (n 20 ºC/D) 1,3723
- Dielectric const.: (25 ºC) 6,0
- LD 50 (oral, rat): 5620 mg/kg
- EC-Index-No.: 607-022-00-5
- ADR: 3 F1 II UN 1173
- IMDG: 3 II UN 1173
- IATA/ICAO: 3 II UN 1173
- GHS-signal word: Danger
- GHS-H sentences: H225 - H319 - H336 - EUH066
- GHS-P sentences: P210 - P303+P361+P353 - P305+P351+P338 - P370+P378 - P405 - P501a
- Tariff number: 2915 31 00 00
- Applications: solvents, perfumery, photography.
SPECIFICATIONS
assay (G.C.): min. 99,8 %
identity (IR-spectrum): passes test
density (20º/4º): 0,900 - 0,902
residue on evaporation: max. 0,0001 %
water (K.F.): max. 0,02 %
Suitable for organohalogenated pesticide and dioxins, furans and PCBs residue analysis ECD, from 1,2,4-trichlorobenzene to decachlorobiphenyl, no peaks are obtained greater than 3 pg/ml as lindane. No peaks are obtained in vicinity of 2,4,5-trichlorobiphenyl.
- Synonyms: Acetic acid ethyl ester, Acetic ether
- C4H8O2
- M = 88,10 g/mol
- CAS [141-78-6]
- EINECS-No.: 205-500-4
- Density: 0,90 g/cm3
- Solub. in water: (20 ºC): 85,3 g/l
- Melting point: -83 ºC
- Boiling point: 77 ºC
- Flash pt. -4 ºC
- Ignition temp.: 460 ºC
- Vapour pressure: (20 ºC) 97hPa
- Refraction index: (n 20 ºC/D) 1,3723
- Dielectric const.: (25 ºC) 6,0
- LD 50 (oral, rat): 5620 mg/kg
- EC-Index-No.: 607-022-00-5
- ADR: 3 F1 II UN 1173
- IMDG: 3 II UN 1173
- IATA/ICAO: 3 II UN 1173
- GHS-signal word: Danger
- GHS-H sentences: H225 - H319 - H336 - EUH066
- GHS-P sentences: P210 - P303+P361+P353 - P305+P351+P338 - P370+P378 - P405 - P501a
- Tariff number: 2915 31 00 00
- Applications: solvents, perfumery, photography.
SPECIFICATIONS
assay (G.C.): min. 99,8 %
identity (IR-spectrum): passes test
density (20º/4º): 0,900 - 0,902
residue on evaporation: max. 0,0001 %
water (K.F.): max. 0,02 %
Suitable for organohalogenated pesticide and dioxins, furans and PCBs residue analysis ECD, from 1,2,4-trichlorobenzene to decachlorobiphenyl, no peaks are obtained greater than 3 pg/ml as lindane. No peaks are obtained in vicinity of 2,4,5-trichlorobiphenyl.
Connect:
Gato Pérez, 33. Pol. Ind. Mas d’en Cisa E08181 Sentmenat, Barcelona, España
T +34937456400F +34937152765
helpdesk@scharlab.com
Chemicals Microbiology Glassware, quartz and porcelain Chromatography Equipment Consumables Safety and hygiene